Replacing Halogen Bulbs 
The halogen bulbs used in the ceiling lighting of the wine vault will provide years of service under normal operating conditions. However, should a bulb burn out, refer to the following instructions to replace the bulb.
WARNING!
Halogen bulbs generate intense heat. Be certain power is off and lamps have sufficient time to cool before attempting to replace.
Bulbs may break during replacement. Be careful when removing or installing bulbs.
To replace a halogen bulb:
Step 1 Set the motion sensor switch to OFF. To ensure sufficient illumination, it may be necessary to use an auxiliary light while replacing the bulb.
Step 2 Twist the light shield counterclockwise to disengage the locking tabs, then pull straight down to remove.
Step 3 Remove the burned out bulb by pulling it straight out and replace the bulb with a 12 VAC, G4 Base,
Step 4 To reinstall the light shield, align the three tabs on the light shield with the slots in the light fixture. Twist the shield clockwise until the tabs lock in place.
Step 5 Set the motion sensor switch to AUTO.
To order replacement bulbs, call the Monogram Wine Vault Line at: 877.234.WINE (877.234.9463). The light bulb part number is WR02X12174.
Remove the light shield to
access the bulb.
Pull the bulb straight out
from the socket.
Use a 12 VAC, G4 Base,
To order replacement bulbs,
call the Monogram Wine Vault Line at 877.234.WINE (877.234.9463).
27
