Changing the Lower Access Panel
WARNING: Do not operate the icemaker with the lower access panel or control panel removed. Electrical shock or personal injury could result.
1.Remove the screw from the top of the lower access panel and the two screws in the bottom grille area. Pull forward at the bottom, then down to remove the panel.
2.Remove the two screws from the top panel trim and remove the top trim.
3.Carefully slide the panel out.
4.Choose the color you want to show and carefully slide the panel back into the lower access panel.
NOTE: Be careful not to scratch the panel as it is inserted.
5.Replace the top trim and screws. Replace the lower access panel assembly and screws. The top of the access panel needs to be secured under the two metal tabs before replacing the screws.
NOTE: You can make a decorative wood front to match existing cabinets. See the section on Custom Door and Access Panels.
Lower | Screw | |
Access | ||
| ||
Panel |
| |
Grill |
| |
Area |
| |
| Screws |
(continued next page)
13
