CARE AND CLEANING
Unplug the wine chiller before cleaning.
Condenser
Be sure that nothing obstructs the required air flow openings in the front of the cabinet.
For best performance, brush or vacuum lint and dirt from the condenser once a year. Unscrew the grille on the bottom front of the cabinet to access the condenser.
Cabinet
The painted cabinet can be washed with mild soap and water. Rinse thoroughly with clear water. Never use abrasive scouring powders.
Interior
Wash the inside with mild soap and water or baking soda and water.
Do not use an abrasive powder, solvent, polish cleaner or undiluted detergent.
Glass Door
Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.
Door Gasket
The vinyl gasket may be cleaned with mild soap and water, a baking soda solution or a mild scouring powder. Rinse well.
Light Bulb Replacement
Unplug the wine chiller before replacing the light bulb.
The light shield is held in place by three screws. Remove the screws and light shield to remove the light bulb. Replace with the same type
In the Event of a Power Failure
If the power fails, open the door as infrequently as possible to maintain the temperature. A gradual rise in temperature should not have any adverse effect on the wine.
If it is extremely hot, you may want to move the wine to the coolest location you can find until power is restored.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
6
