GE Monogram ZEU30R Attach Foam Strips, Locate Mounting Parts Attach Brackets to Cooktop

Attach Foam Strips

Installation

Electronic Radiant Cooktop

Apply the foam strips around the outer edge	Bottom of
of the glass. Do not overlap the foam strips.	Cooktop

Foam Strips

Cooktop

Glass

Locate

Mounting

Parts

Attach Brackets to Cooktop

Remove the hold down brackets and	MOUNTING
	SCREW
screws from the literature package.

Screw the Hold Down Bracket to the side of the cooktop unit. Repeat for opposite side of cooktop.

Pre-drilled

Bottom ofhole

Cooktop

Foam Strips

Cooktop

Glass

Insert

Cooktop

Into

Cutout

Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met.

IMPORTANT: If the cooktop

!is being installed into a blind counter (one with no cabinet opening below), wire connections

must be made before putting the cooktop into the cutout opening.

COOKTOP

Hold

Down

Bracket

Attach Hold Down Brackets to Cabinet

Open the cabinet door and screw the Hold Down Brackets to the cabinet sides with the screws provided.

BURNER BOX

SIDES

MOUNTING

SCREW

CABINET

SIDE

USE SUITABLE FASTENERS FOR ANCHORAGE IN CABINET SIDES

6