Pre-Test Checklist
Checking the Installation & Cooktop Operation
Electronic Radiant Cooktop
•Remove all protective film if present, and any stickers.
•Check to be sure that all wiring is secure and not pinched or in contact with moving parts.
•Check level of appliance.
•Check that the cooktop is properly grounded.
Operation Checklist
•Remove all items from the top of the cooktop surface.
•Turn on the power to the cooktop. (Refer to your Owner’s Manual.) Verify that all surface units operate properly.
•Check that the circuit breaker is not tripped nor the house fuse blown.
•Check that conduit is securely connected to the junction box.
•See Owner’s Manual for troubleshooting list.
•NOTE TO ELECTRICIAN:
The power leads supplied with this appliance are UL recognized for connections to larger gauge household wiring. The insulation of these leads is rated at temperatures much higher than the temperature rating of household wiring. The current carrying capacity of a conductor is governed by the wire gauge and also the temperature rating of the insulation around the wire.
Monogram®
General Electric Company
Louisville, KY 40225
NOTE: While performing installations described in this book, safety glasses or goggles should be worn.
To obtain specific information concerning any Monogram product or service, call GE Answer Center® consumer information service at
For Monogram local service in your area, call 1.800.444.1845.
NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
31-10543
229C4053P527
(09/02 JR)