| Installation Instructions |
|
|
TOOLS REQUIRED | MATERIALS REQUIRED |
• Tinsnips to cut banding | • 35" long 2x4 for |
• Stepladder | • 1/4" copper water line tubing or GE |
• Bucket | SmartConnect™ Refrigerator Tubing kits |
• Level | • Water |
• Appliance Hand Truck | • Custom panels for fresh food door, freezer drawer |
• Tubing cutter | and grille panel |
• 7/16" | • Screws to secure refrigerator to cabinetry. |
• #2 Phillips screwdriver | • |
• Drill and appropriate bits | 1/4" side panels |
• 5/16", 7/16" socket | FLOORING |
• Safety glasses |
•
• Pliers | For proper installation, this refrigerator must be | |
placed on a level surface of hard material that is at | ||
• 1/4" ratchet | ||
the same height as the rest of the flooring. This | ||
| ||
HARDWARE SUPPLIED | surface should be strong enough to support a fully | |
loaded refrigerator, or approximately 1,200 lbs. | ||
| ||
• Water filter bypass plug | NOTE: Protect the finish of the flooring. Cut a large | |
• | ||
section of the cardboard carton and place under the | ||
• 1/4" nut and ferrule | ||
refrigerator where you are working. | ||
|
GROUNDING THE REFRIGERATOR
IMPORTANT—(Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with a
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Where a standard
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
9