GE Monogram ZIS36N, ZISB36D, ZISW36D manual ntinlled next c~ge

PROBLEM	POSSIBLE CAUSE
DOORS NOT	● Refrigerator not level. Adjust levelers or call the installer. When cabinet
CLOSING PROPERLY	is level, doors will close gently and securely.
FROST OR ICE	● Door may have been left ajar or package holding door open.
CRYSTALS ON	“ Too frequent or too long door openings.
FROZEN FOOD
	● Frost within package is normal.
AUTOMATIC	● Icemaker feeler arm in STOP (up) position.
ICEMAKER	● Water supply turned off or not connected.
DOES NOT WORK
	● Freezer compartment too warm.
	● Cubes too small—water shutoff valve connecting refrigerator to home water line
	may be clogged.
	● Sometimes cubes fuse to the side of the ice mold and hold the feeler arm in the
	STOP (up) position. Remove this ice to restart the icemaker.
	● When reaching for cubes by hand, you may have pushed the feeler arm into the
	STOP (up) position by mistake.
	● Piled up cubes in storage bin may cause icemaker to shut off prematurely. With
	icemaker feeler arm in STOP (up) position, level cubes in bin by hand.
SLOW ICE CUBE	● Door may have been left open.
FREEZING	● Turn temperature of freezing compartment colder.
ICE CUBES HAVE	● Old cubes need to be discarded.
ODOWTASTE	● Ice storage bin needs to be emptied and washed.
	● Unsealed packages in refrigerator andor freezer compartments may be
	transmitting odor/taste to ice cubes.
	c Interior of refrigerator needs cleaning.
	● Poor-tasting incoming water. Install a water filter,
CUBE DISPENSER	● No ice cubes. Remove storage bin. If cubes are frozen to wire arm, remove cubes.
DOES NOT WORK	● No ice cubes. Icemaker turned off or water supply turned off.
	● Irregular ice clumps in storage container. Break up as many as you can with
	fingertip pressure and discard the remaining clumps.
WATER HAS POOR	● If water dispenser has not been used for an extended period, dispense water in
TASTE/ODOR	regular manner until all water in reservoir is replenished with fresh water.
	“ Poor-tasting incoming water. Install a water filter. See the Walter Filter
	Accessory section of this book.
WATER IN FIRST	● Allow about 24 hours for water to cool to proper temperature after refrigerator is
GLASS IS WARM	first installed.
	● If water dispenser has not been used for extended period, water in first glass will
	not be as cool as in succeeding glasses.
	● If water reservoir has been drained, allow several hours for replenished supply
	to chill.
	(([)ntinlled next []c~ge)

19