Geemarc AMPLI455 Making a Call

26

Making a Call

Pick up the handset.

When you hear the dialling tone, dial the number on the

keypad.

To end the call simply replace the handset in the cradle

Making a Call – Hands Free

Press the SPKR button to get a dialling tone then dial the

telephone number on the keypad. The icon appears on the

LCD. To end the call, simply press SPKR again. The icon

will disappear.

To activate the Hands Free function during the call, press the

SPKR button and replace the handset on the cradle at the same

time.

To deactivate the Hands Free function during a call, lift the

handset.

Note: When in hands free mode, only one person may talk at a

time. The switch-over between speaker and microphone is

automatic. This is dependent on the sound level of the incoming

call and the microphone respectively. It is therefore essential

that there are no loud noises, e.g. music, in the immediate vicinity

of the telephone, as this will disrupt the hands free function.

Speakerphone Volume Setting

In hands free mode you can adjust the speaker volume by using

the volume controls VOL+or VOL- located on the right side of the

phone.

USING THE TELEPHONE

Contents

Main Page Page Page Page Page INTRODUCTION Unpacking the Telephone General Description Key Description Page 9 LCD Description 10 Private Menu Navigation Page Setting Up Wall Mounting INSTALLATION INSTALLATION Set Language Set Contrast Night Light Function Set Font size Hour Format Setting Date Format Setting Ringer Setting Incoming Call Notification Setting VIP Ringer Setting Keypad Tones Setting Call Waiting Flash Time Setting Dialling Mode Setting Setting Date and Time Dialling Talking Setting Caller ID Talking Setting Review the Phonebook and Caller ID List Voice Prompt Receiving Volume and Tone Settings Page Page Making a Call Last Number Redial Dialling a Number from the Redial List Clear the Redial List Mute Function Hold Function Receiving a Call Hearing Aid Use Flash Signal OPTIONAL ACCESSORIES Shaker Headset and Audio Neck Loop Use CALLER ID CALLER ID 31 View Caller ID List Dial a Number from the Caller ID List CALLER ID Add a Number from the Caller ID List to the Phone Book Delete a Number from the Caller ID List Delete All Numbers from the Caller ID List Caller ID on Call Waiting Create a Phone Book Entry using the Menu Create a Phone Book Entry in Standby Mode Page View Phone Book Entries Dial a Phone Book Entry Modify a Phone Book Entry Delete a Phone Book Entry Voice Announce a Phonebook Entry Record Voice Announce for a Phonebook Entry Delete Voice Announce for a Phonebook Entry 40 Press OPTIONS soft key SELECT QUICK DIAL Create a Quick Dial Number View/Dial a Quick Dial Number QUICK DIAL 42 Clear a Quick Dial Number Press STORE. The LCD display will show Switching the Answering Machine On/Off Outgoing Message Recording an Outgoing Message Checking the Outgoing Message Restore the Outgoing Message Answering Machine Settings Listening to Messages Call Screening Incoming Message Voice Slow Operating the Answering Machine Remotely Remote Code 50 Remote Control Remote Control Commands 2 Recording a Memo Out of Memory TROUBLESHOOTING No display Ampli455 does not ring No dial tone Interference on the line SAFETY INFORMATION Page Page Page Page GUARANTEE