50

Remote Control
Call the answering machine (using your telephone
number)
While the outgoing message is playing, enter the remote
code
If the remote code is accepted, the system will play the
menu of commands. You can then follow the voice
prompt to operate
When you have finished accessing the machine replace
the handset.
Remote Control Commands
Command Functions
2 Play new messages
2 twice Stop playback
0 Erase single message during
playback
1 Review
3 Skip to next message
4 Switch the answering machine
on/off
7 Repeat the menu again
Recording a Memo
You can leave a memo for other answering machine users (up to
3 minutes).
To record the memo, press and hold the key in standby
mode. The display will show ‘RECORDING MEMO’ and start
the recording. The key should be pressed and held down
whilst recording. Release the key to end the recording.
ANSWERING MACHINE