HANDSET SETTINGS

5 - NETWORK FEATURES, FLASH TIME, DIAL PAUSE

1 - Press the key.

2 - Press the ( ) or the ( ) key to select the desired icon shown on the display. The selected icon will flash on the display.

3 - Press the key to select the icon.

4 - You can choose from the menu below:

1/5 1/2 : 1 For UK, 2 for France (CID features). 2/5 Tone/Pulse for dialling must be set to Tone. 3/5 A,B,C,D (Telephone network settings)

4/5 Flash time R key

5/5 Dial pause to insert a pause in the mumber

You can scroll into the menu by pressing the key. Press the ( ) or

the ( ) key to modify entries, press to confirm modification.

5 - Press the key to exit the menu.

Network settings

You can choose between 4 network settings: A Factory setting (default value), B, C, D

These settings are used to match the signal level when working on different phone networks.

Note: The setting should be left to A

Flash time settings for . You can choose between 2 settings:

a)

***

100 ms for United Kingdom

b)

******

300 ms for France

Dial pause settings

You can insert a pause time in a phone number after the first digit, the digits after the pause time are dialled after a 3 seconds delay. Two settings are available to use this feature Yes or No.

15

Page 15
Image 15
Geemarc Ampli DECT150 manual Network FEATURES, Flash TIME, Dial Pause