USING THE PHONE
The following settings are available:
1 - The V switch set to | and | activated (key is lighting). |
|
The handset volume can be adjusted within the following values range : | |||
4 dB / 8 dB / 12 dB / 16 dB. |
|
|
|
2 - The V switch set to | and | activated (key is lighting). |
|
The handset volume can be adjusted within the following values range: | |||
16 dB / 20 dB / 24 dB / 28 dB. |
|
| |
In addition for both settings, you can use the tone control | slider switch | ||
to increase treble and bass up to 10 dB. |
| ||
Notes:
-Pressing the 
key deactivates the additional amplification and the tone control functions (Key is not lighting).
-You can leave the V slider switch to 
position if the phone is always used by impaired hearing user.
5 - PAGING THE HANDSET
If you wish to locate your handset simply follow the instructions below:
1 - Press the 
key on the base unit located on the base front side.
2 - All registered handsets will be paged and will ring.
3 - Press twice the 
on the located handset to stop the paging mode.
Pressing the 
key on the base unit has the same effect.
6- TIMER
A timer will be displayed on the screen after starting the call. You can check the call length by using this function.
17
