24
ADDITIONAL HANDSETS
1 - GENERAL SETTINGS
With the DECT standard you have the possible settings below:
- Register up to 4 handsets to one base unit.
- Register up to 2 base units to each handset.
- Make internal call handset to handset and transfer call between handsets
registered to the same base unit.
- You can increase the phone range by using 2 base units (move between
the phone coverage areas).
The additional handset will not be equiped with the answering machine
button, the function is only assigned to the main handset.
2 - USING SEVERAL HANDSETS ( Registration)
For practical applications and to make life easier, you can register several
handsets to the same base unit. You will be able to answer a call anywhere at
any time because all handsets will ring at the same time. You can call others
registered handsets in different rooms.
You can transfer an incoming call to another handset.
How to use several handsets
All handsets you wish to use in the base unit must be registered to this base
unit.To add another handset please follow instructions below for each handset:
1 - Unplug the mains adaptor from the base unit for a few seconds.
2 - Replace the adaptor to the power socket.
3 - Press the key.
4 - Press the or the key to select the icon shown on the display.
then press key.
5 - Enter the base unit PIN code (factory setting to 1111), then press
6 - The handset is now searching for the base unit to be registered.
The icon is shown fixed, the handset is ready to be used .
Note: to get the maximum efficiency and maximum range you must put the
handset near the base unit. The handset range will be the same for each
handset.