Gefen EXT-HD-CP-FM10 user manual Cable Descriptions, Power Indicator Sender module

CABLE DESCRIPTIONS

1Power Indicator (Sender module)

This LED will glow bright green when the Hi-Def source is supplying sufficient power to the Sender module. If the LED flashes green, then the source is unable to power the Sender module. See page 7 for more information.

2Fiber Optic Connector (Sender module)

Connect an SC-terminated fiber optic cable from the Sender pigtail module to the SC fiber connector on the Receiver pigtail module.

3HDMI Connector, male (Sender module)

Connect this end of the Sender pigtail module to the Hi-Def source.

4Power Indicator (Receiver module)

This LED will glow bright green when one of the included 5V DC power supplies is connected to the power receptacle on the Receiver module.

5Fiber Optic Connector (Receiver module)

Connect the SC-terminated fiber optic cable from the Sender pigtail module to the SC fiber connector on the Receiver pigtail module.

6HDMI Connector, male (Receiver module)

Connect this end of the Receiver pigtail module to the HDTV display.

7Power Receptacle (Sender / Receiver module)

Connect the included 5V DC power supply to this power receptacle. Both the Sender and Receiver module have power receptacles. However, the Sender module does not need to be externally powered unless the source does not supply enough power through the HDMI connector.

5