RMT-16IR Remote Description

The RMT-16IR remote control will allow the user to select which source will be routed to which output. Each of the 4 outputs are assigned a group of 4 buttons that will correspond to the 4 source inputs. Each button on the RMT-16IR remote control will toggle between the “A” and “B” sources for each input. Please use the information below when selecting the desired source for each display.

RMT-16IR Button	Source	Display
1	Toggle 1A and 1B	1
2	Toggle 2A and 2B	1
3	Toggle 3A and 3B	1
4	Toggle 4A and 4B	1
5	Toggle 1A and 1B	2
6	Toggle 2A and 2B	2
7	Toggle 3A and 3B	2
8	Toggle 4A and 4B	2
9	Toggle 1A and 1B	3
10	Toggle 2A and 2B	3
11	Toggle 3A and 3B	3
12	Toggle 4A and 4B	3
13	Toggle 1A and 1B	4
14	Toggle 2A and 2B	4
15	Toggle 3A and 3B	4
16	Toggle 4A and 4B	4

Page 11

Image 11

Gefen EXT-HDMI-844 user manual RMT-16IR Remote Description

Contents

8x4 Matrix for Write To Asking for AssistanceTechnical Support Technical Support Hours Contents How It Works IntroductionGefen Gefen 8x4 Matrix for Hdmi Operation Notes Package Includes Features Front Panel Back Panel Panel Layout Panel Descriptions How to Operate the 8x4 Matrix for Hdmi Connecting and Operating the 8X4 Matrix for HdmiHow to Connect the 8x4 Matrix for Hdmi LED Array Scenario 1 a Example RMT-16IR Remote Description How Do I change the Remote Channel? IR Code ConfigurationWhy would I need to change the remote channel? Am experiencing the issues listed above. What do I do? How do I change Edid modes in the 8x4 Matrix for HDMI? Edid Management FeatureEDID. What is it and what is it used for? Why is Edid so important with the 8x4 Matrix for HDMI? Function Edid Management ModesEdid Modes RS-232 Serial Communications How do I use these features?What are the communication port settings? IR Remote Channel Conﬁguration RS-232 Serial Communications CommandsSwitching/Routing Binary Table Edid Management Modes Specifications Product Registration WarrantyPage Page Rev A2 Nordhoff St., Chatsworth CA