
CONNECTING THE HDMI SUPER BOOSTER CABLE
How to Connect the HDMI Super Booster Cable
1.Connect the HDMI Super Booster Cable’s male end to the HDMI source. The male end has no lights or adjustment controls on it and is considerably smaller than the larger female end.
2.Connect the HD display to the large female end of the HDMI Super Booster Cable using a short
3.Should it be necessary (see NOTE below), plug the power supply into the female end of the HDMI Super Booster Cable.
NOTE: In normal scenarios, the AV source device outputs the 5V signal needed to power the cable. If a sufficient voltage is not provided by the source, the included 5V DC power supply can be connected to the Super Booster Cable. To determine if this is necessary, look to see if the power LED indicator on the front of the HDMI Super Booster Cable head is active (see page 4). If the power LED is not active, the AV source is not supplying the requisite 5V needed to power the HDMI Super Booster Cable and the included power adapter will need to be connected to the power jack on the rear of the Super Booster Cable head (Female Side) as shown below.
Female Side (Rear)
Rear of Female Side Showing 5V Power Jack for the included Power Supply
5