Nikon 3200 2200 manual Connecting the USB Cable, Viewing Pictures on a Computer, UC-E6 USB cable

Viewing Pictures on a Computer

Connecting the USB Cable

Turn the computer on and wait for it to start up. After confirming that the cam- era is off, connect the UC-E6 USB cable as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

More on Playback

UC-E6 USB cable

You can now turn the camera on and transfer pictures as described in the Quick Start Guide.

Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE), Mac OS 9 (9.0-9.2)

Do NOT select PTP when connecting the camera to a computer running one of the above operat- ing systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in the USB menu, disconnect the camera as described below. Be sure to select Mass Storage before reconnecting the camera.

Windows 2000 Professional

A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel to close the dialog, and then disconnect the camera.

Windows Millennium Edition (Me)

After displaying a message stating that the hardware information database is being updat- ed, the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and then disconnect the camera.

Windows 98 Second Edition (SE)

The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera.

Mac OS 9 (9.0 - 9.2)

A dialog will be displayed stating that the computer is unable to use the driver needed for the "Nikon Digital Camera E3200_PTP" (E3200) or "Nikon Digital Camera E2200_PTP" (E2200) USB device. Click Cancel to close the dialog, and then disconnect the camera.

46