Sharp LL-T1815 operation manual Connecting the monitor and turning the monitor on and off

Connecting the monitor and turning the monitor on and off

If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a Macintosh conversion adapter (commercially available) to the analog signal cable.

Macintosh conversion adapter

When connecting using separately sold digital or analog signal cables

The separately sold display cable enables connec- tion between the DVI-I input terminal on the display and the digital or analog RGB output terminal of the computer.

When connecting to a digital RGB output terminal: - Use a digital signal cable (model name: NL-

C01E)

-For digital RGB connection, the monitor has an input for connecting to a computer with a DVI- compatible output connector (DVI-D 24 pin or DVI-I 29 pin) and SXGA output capability. (Depending on the type of computer to be

connected, the display may not work correctly.)

When connecting to an analog RGB output terminal: - Use an analog signal cable (model name: NL-

C02E).

DVI-I input terminal

Display cable

RGB output terminal

(purchased separately)

-Paying attention to connector direction, firmly insert the signal cable to terminal, and then tighten the screws at both sides.

Note:

-When using digital or analog signal cables, set [INPUT-2] to [1 LINE]. (p.21, 24)

Set the monitor as follows when establishing a digital connection with a Power Mac using an ADC- DVI adapter made by Belkin. (Operation has been checked with the Power Mac G4 M7627J/A)

-Perform settings with the Power Mac power supply off.

1.After connecting the power cord, turn on the monitor’s main power.

2.Press the button and button simultaneously, and while doing this press the POWER button (i.e. turn the power on).

MAC DIGITAL

INPUT-2 OFF ON

3.Set to "ON" with the buttons.

-Do not set to [ON] if you are not using a Belkin ADC-DVI adapter, as this may result in incorrect display.

4.Press the power button, and turn off the monitor power.

This completes setting.

When connecting using a separately sold 2- input cable

The separately sold 2-input cable (model name:NL- C03J) enables 2 system connection.

1.Connect a 2-input cable (purchased separately) to the DVI-I input terminal on the display.

DVI-I input terminal

mini D-sub 15 pin

2-input cable (purchased separately)

DVI-D24 pin

12