Sharp LL-T1815 Connect the accessory audio cable, Connection of headphones commercially available

Connecting the monitor and turning the monitor on and off

2.Connect the analog and digital signal cables (purchased separately) to the 2-input cable, then connect to a computer.

Analog signal cable

Digital signal cable

( NL-C01E, purchased separately)

Analog RGB output terminal

Digital RGB output terminal

-Paying attention to connector orientation, firmly insert the signal cable into the PC, and then tighten the screws at both sides.

Notes:

-When using a 2-input cable, set [INPUT-2] to [2 LINES]. (p. 21, 24)

-The monitor connected to the mini D-sub connector of the 2-input cable may not be automatically recognized and setup under Plug & Play. Perform storage of setup information manually. (p. 30)

Connect the accessory audio cable

When the accessory audio cable is connected to the audio output terminal of the computer, the sound of the connected computer is output from the display speakers. You can also use the headphone jack of the display.

Audio input terminal

Connection of headphones (commercially available)

Headphones (commercially available) can be connected.

Headphone terminal

Headphones

Notes:

-When the headphones are connected, no sound can be heard from the monitor speakers.

Connecting the monitor to a power source

Power terminal

AC outlet

Power cord

English

Audio cable

To audio output terminal

13