Adjusting the screen display (With analog connection)

GAIN CONTROL Menu

GAIN CONTROL

 

 

 

 

 

 

 

MANUAL

 

 

AUTO

BLACK LEVEL

88

 

CONTRAST

73

 

INPUT-1 ANALOG

 

1280 x 1024

V : 60Hz

H : 64kHz

 

 

 

 

 

MANUAL: Individual menu options are manually adjusted.

AUTO: Every menu option is automatically adjusted using the Auto Gain Control* function.

Notes:

-Press the button to select [AUTO].

-To choose a menu option: button

-To go to the next menu: MENU button

* Auto Gain Control function

-The Auto Gain Control adjusts contrast and black level based on the brightest color of the image displayed. If you are not using the Adjustment Pattern it is necessary to have an area of 5 mm x 5 mm of white displayed, and if not adjustments may not be possible. (In such case, [OUT OF ADJUST] will appear and setting values remain unchanged.)

-If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. Please perform manual adjustment instead.

BLACK LEVEL

Total screen brightness can be adjusted while

watching the color pattern. ( buttons)

Color pattern

CONTRAST

While watching the color pattern, adjustments can be made so that all graduations appear. ( buttons)

COLOR CONTROL Menu

COLOR CONTROL

 

 

 

 

 

 

 

 

 

COLOR MODE

 

sRGB

 

STD VIVID

 

WHITE BALANCE

 

 

 

 

GAMMA

 

 

 

 

INPUT-1 ANALOG

 

 

1280 x 1024

V : 60Hz

H : 64kHz

 

 

 

 

 

 

Notes:

-To choose a menu option: button

-To go to the next menu: MENU button

COLOR MODE

Color tone can be set as below.

STD ......... Displays image with the color tone

results from original scheme of liquid crystal panel.

sRGB ....... sRGB is international standard of

color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and repre- sents color tone close to it original image.

VIVID ....... Displays an image with dynamic and

VIVID primary colors.

Subsequent items can be set when the [COLOR MODE] is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the button and display the adjustment menu.

WHITE BALANCE

COOL STD WARM USER

R-CONTRAST

G-CONTRAST

B-CONTRAST

OK <MENU>

Notes:

-On settings other than [STD] not all graduations can be displayed. To display all graduations, set to [STD].

-Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

-Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [B- CONTRAST], in order to make fine adjustments.

-Use the button to select [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST].

-When adjustment complete: MENU button

20

Page 20
Image 20
Sharp LL-T1815 operation manual Gain Control Menu, Color Control Menu