Sharp LL-T1815 Adjusting the screen display With digital connection, Button for red

Adjusting the screen display (With digital connection)

COOL ..... Color tone bluer than standard

•........... Color tone slightly bluer than standard

STD Color tone standard setting

•........... Color tone slightly redder than standard

WARM .... Color tone redder than standard

USER

R-CONTRAST	button for blue-green
	button for red
G-CONTRAST	button for purple
	button for green
B-CONTRAST	button for yellow
	button for blue

GAMMA

Adjust so that dark and bright images are easy to see. If the screen is dark and hard to see, increase the numerical value. If it is bright and hard to see,

lower the numerical value. ( buttons)

MODE SELECT-1 Menu

MODE SELECT - 1
	INFORMATION
	OFF TIMER
INPUT-2		1LINE	2LINES
	INPUT-2 DIGITAL
	1280 x 1024	V : 60Hz	H : 64kHz

Notes:

-To choose a menu option: button

-To go to the next menu: MENU button

INFORMATION

A model name (MODEL), a serial no. (S/N), and usage time (USAGE TIME) of the display can be checked.

After selecting [INFORMATION], press the button (Checking done: MENU button)

OFF TIMER

Power is automatically shut off when the set time elapses.

After selecting [OFF TIMER], press the button

and set [ON] / [OFF] by pressing the buttons. If selecting [ON], press the button and set the

shut-off time by pressing the buttons. (Be- tween 1 and 23 hours may be set, by the hour.)(Setting done: MENU button)

-When [ON] is selected, the remaining time is displayed in the upper right of the screen during the last 5 minutes before the shut-off. (The remaining time is displayed for approx. 5 seconds, on each minute)

-To clear automatic shut-off temporarily, press the power button between the display of remaining time and the shut-off of power.

To subsequently turn the power off, press the power button again. (When next turning on power, power is again automatically shut off when the set time elapses.)

INPUT-2

Set [1 LINE] when connecting digital or analog signal cables to a DVI-I input terminal (INPUT-2) on the display.

Set [2LINES] when connecting a 2-input cable.

( buttons)

-If the connections and settings are not correctly set, the screen will not be correctly displayed.

24