Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.

3. Connect the other end of the cable (if applicable) to your device.

Parent topic: Connecting to External USB Devices

Related topics

Projecting a PC Free Presentation

Projecting a Slide Show

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the USB-Aport.

1.Make sure the connected USB source is turned on, if necessary.

2.Press the USB button on the remote control.

3.Press the button again to cycle through other USB sources, if available.

Parent topic: Connecting to External USB Devices

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector.

1.If the device has a power button, turn off and unplug the device.

2.Disconnect the USB device or camera from the projector.

Parent topic: Connecting to External USB Devices

Connecting to a Document Camera

You can connect the Epson DC-06 document camera to your projector's USB-A(PowerLite 1930/1940W/1950/1960) or document camera (PowerLite 1945W/1955/1965) port to project images viewed by the camera.

38

Page 38
Image 38
Epson 1930 manual Connecting to a Document Camera, Selecting the Connected USB Source