Related tasks
Resetting the Lamp Timer
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.
1.Turn on the projector.
2.Press the Menu button.
3.Select the Reset menu and press Enter.
4.Select Reset Lamp Hours and press Enter.
You see a prompt asking if you want to reset the lamp hours.
5.Select Yes and press Enter.
6.Press Menu or Esc to exit the menus.
Parent topic: Projector Lamp Maintenance
Related tasks
Replacing the Lamp
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
155
