5. Press the Menu button, select the Extended menu, and press Enter.

6.Select the Multi-screensetting and press Enter.

7.Set the Adjustment Level setting to 1 and press Enter.

8.Set the remote control ID to match the second projector.

9.Access the Extended menu Multi-screensetting on the second projector and set the Adjustment Level setting to 1.

10.Adjust the Brightness Correct. setting on the projector with the darkest display so it matches the lighter display, and press Enter. (You may need to switch the remote control ID back and forth to make adjustments to each projector in all of these steps.)

11.Change the Adjustment Level setting to 5 on each projector, but this time match the lighter display to the darker one.

12.Adjust the Brightness Correct. setting on Adjustment Level 2, 3 , and 4 in the same way.

13.Adjust the Color Correct. settings for green-to-red (G/R) and blue-to-yellow (B/Y) balance for all the levels on both projectors in the same way.

14.If you need to match more projectors, repeat these steps matching projector 3 to projector 2, 4 to 3, and so on.

Parent topic: Projector Identification System for Multiple Projector Control

Related references

Projector Setup Settings - Extended Menu

126

Page 126
Image 126
Epson 1930 manual 126