Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
Information item | Description |
Lamp Hours | Displays the number of hours (H) the lamp has been used in |
| Normal and ECO Power Consumption modes; if the information is |
| displayed in yellow, obtain a genuine Epson replacement lamp |
| soon |
Source | Displays the name of the port to which the current input source is |
| connected |
Input Signal | Displays the input signal setting of the current input source |
Resolution | Displays the resolution of the current input source |
Video Signal | Displays the video signal format of the current input source |
Refresh Rate | Displays the refresh rate of the current input source |
Sync Info | Displays information that may be needed by a service technician |
Status | Displays information about projector problems that may be needed |
| by a service technician |
Serial Number | Displays the projector's serial number |
Event ID | Displays the Event ID number corresponding to a specific projector |
| problem; see the list of Event ID codes |
142
