PITCH BEND:
1.Pushing the PITCH BEND (23) buttons will temporarily raise or lower the pitch without changing the slide setting. Releasing the buttons will return the pitch to the slide setting.
USING THE REVERSE BUTTON:
1.Press the REVERSE (30) button to reverse the rotation of the PLATTER
(2) (the REVERSE LED (30A) will light while in reverse mode). Press the REVERSE button a second time to return to normal play.
DIGITAL DISPLAY:
1.The DIGITAL DISPLAY (20) indicates SPEED (20A), PITCH SLIDE ACTIVATION (20B), PLAY (20C), PAUSE (20D), REVERSE (20E) and PITCH PERCENTAGE (20F).
ARM-LIFT HEIGHT ADJUSTMENT:
If the
Specifications
TURNTABLE SECTION:
Type | Quartz Direct Drive Manual Turntable |
Drive Method | Direct Drive |
Motor | Brushless DC Motor 18V |
Platter | Aluminum Diecast 13” (332mm) Dia. |
Speed | 33 1/3, 45 or 78 RPM |
Starting Torque | 2.2 kg/cm |
0.6 sec. standstill to 33 1/3 RPM | |
Braking System | Electronic Brake |
Wow and Flutter | 0.01% WRMS* |
*This rating refers to the turntable assembly and platter only and excludes effects of records, cartridges or tonearms.
Rumble | 78 dB (IEC 98A WTD) | |
TONEARM SECTION: |
|
|
Type | Universal Straight Tubular Arm | |
Effective Length | 9 1/16” (231.5 mm) | |
Arm Height Adjust Range | 0 - 6 mm | |
Overhang | 19/32" (15.1 mm) | |
Effective Mass | 9 g (Without Cartridge) | |
Offset Angle | 22° | |
Friction | Less Than 7 mg (Lateral, Vertical) | |
Tracking Error Angle | Within 2°32' at the outer groove and within | |
| 0°32' at the inner groove of a 30 cm (12") record | |
Stylus Pressure Adjust Range | 0 - 5 g | |
Applicable Cartridge Weight Range | 6 - 10 g | |
Headshell Weight | 9 g | |
GENERAL: |
|
|
Power Supply | 115V~60Hz/230V~50Hz | |
Power Consumption | 15 Watts | |
Dimensions | 17 3/4” x 6" x 14" | |
|
| 450mm x 152mm x 352 mm |
Weight | 27 lbs. (12.3 kg) | |
Specifications are subject to change without notice. The weight and dimensions shown are approximate.
Page 6
