Gemini Industries 1SLC805002F0001 manual Components for automation applications

Order codes

Components for automation applications

Gemini switchboards are de- signed to be perfectly compa- tible with ABB components for low voltage control and moni- toring.

For these applications they can be equipped with modular de- vices belonging to the System pro M range, with Tmax moulded-case circuit-breakers and control and signaling de- vices, creating a truly integrated automation system.

When deciding the Gemini lay- out for control and monitoring

applications, not only is it pos- sible to select the box and door in the required size, but you can also select the base plate in one of the three versions in the range.

After wiring with the ducts and the Fix-O-Rapid device, the special standard adjustable feet and hooks must be fitted onto the base plate, allowing it to be inserted inside the box at up to seven different depths and three further levels of adjust- ment: no tools need to be used

to carry out these operations. To finish the job, the inner door can be mounted (reversible and in insulating material), guaran- teeing IP40 degree of protection when the switchboard door is open.

No tools are needed unless the inner door is equipped with but- tons, warning lights, etc.

1SLC805017F00011SLC805015F0001

The fixing hooks and feet supplied in the standard versions are applied without having to use tools, making it possible to install the base plate at seven different depths inside the switchboard. They can also be adjusted at three further positions.

2

1SLC805009F0001

1SLC805018F0001

Application of the inner door guarantees IP40 degree of protection when the switchboard door is open.

1SLC805016F0001 1SLC805021F0001

The base plate can be snap-mounted inside the switchboard.

	Example of the configuration of a
1SLC805020F0001	switchboard for an automation
	light-signaling devices.
	application: some ABB control and
	protection devices are installed on the
	plate. The inner door is fitted with

ABB 10