Gemini Industries 1SLC805002F0001 manual Components for distribution and mixed applications

Order codes

Components for distribution and mixed applications

1SLC805010F0001

In distribution and mixed appli- cations, the Gemini switchboard is designed to be fitted with Sy- stem pro M modular devices and Tmax moulded-case circuit breakers.

The frame is the load-bearing element of the configuration: DIN rails, partial modular plates and the special Tmax mounting and cabling kits are snapped onto the uprights. All the com- ponents can be adjusted to six different depths with a pitch of

12.5mm and arranged at heights with a distance of 75 mm between the rows.

Blank or drilled front panels are applied to protect the equip- ment and these can be hinged onto both sides; the cables are housed inside the vertical wi- ring duct integrated in the up- rights according to an exclusive ABB patent.

Wiring is carried out by pulling out the frame and working from the front; the ergonomic grip and the standard feet and snap- on hooks supplied make it easy to insert it inside the switch- board after the job is finished.

1SLC805025F0001

The DIN rail is supplied with special hooks already in position for attaching to the uprights.

2

1SLC805024F0001

The depth at which the DIN rail, the modular plates, the kit for fixing the Tmax circuit breakers and the wiring duct are positioned can be adjusted with a simple sliding movement.

1SLC805022F0001

The frame can be extracted to make wiring operations easier at the workbench.

1SLC805026F0001

1SLC805023F0001

Fixing hooks and feet allow the frame to be snap-mounted inside the box.

1SLC805064F0001	1SLC805063F0001
The blank and drilled panels are hinged onto both sides; the description of the	The upright with the incorporated
installed components can be kept in the special compartment protected by a	wiring duct is an exclusive ABB patent
transparent, hinged flange.	that rationalizes the path of cables
	inside the switchboard.

ABB 14