Order codes
Basic configurations
In the basic configuration, Gemini switchboards are com- posed of boxes in six different sizes ranging from 335x400x210
mmto 840x1005x360 mm (WxHxD, external measure- ments) and with opaque or transparent doors.
In both versions, the doors are reversible and clip onto the hinges without the need to use
tools; the fact that they open at an angle of more than 180° means that it is easy to work on the components installed inside the switchboard. The seal ap- plied by extrusion along the sides of the doors guarantees IP66 degree of protection. Ac- cess to the inside of the switch- board is protected by a stan- dard double bit lock that can be
replaced by locks of another type available in the accesso- ries.
Boxes and doors can be re- quested either separately or as combined “box + door” codes, to make filling out the order form more flexible.
Inside the packages, the door is always wrapped separately and inserted inside a pocket
that protects it from accidental damage until wiring is com- pleted and the switchboard is installed.
2
1SLC805013F0001
Gemini doors open at an angle of more than 180° giving easy access to the devices installed inside the switchboard.
No tools are needed for installation. The doors hook onto the hinges with special hinge pins and are reversible.
FOTO NUOVA
1SLC805015F0001 | 1SLC805012F0001 |
The special structure of the inner perimeter of the box ensures further protection against the penetration of water. The box is supplied with a spirit level.
1SLC805008F0001
ABB | 6 |
