Generac 1537-0 Know Your Pressure Washer, GeneracPortableProducts2,400PSIHighPressureWasher

GeneracPortableProducts2,400PSIHighPressureWasher

KNOW YOUR PRESSURE WASHER

Read this owner'smanual and safety rules before operating your high pressure washer.

Compare the illustrationswith your high pressure washer to familiarize yourself with the locationsof various controls and adjustments. Savethis manual for future reference.

High Pressure Hose

Recoil Starter

Water Inlet

Adjustable Nozzle

Adjustable Nozzle -- Always attached to nozzle extension. Adjustable nozzle allows you to adjust spray pressure and spray pattern.

Air Filter --Dry type filter element limits the amount of dirt and dust that gets in the engine.

Automatic Cool Down System -- Cycles water through pump when water reaches 140°-145°EWarm water wilt dischargefrom pump onto ground. This system prevents internal pump damage.

Chemical Injection SiphonlFilter --Use to siphon detergent or other pressure washer chemicals into the low pressure stream.

Choke Lever -- Prepares a cold engine for starting.

Spray Gun

Chemical Injection

r_Siphon/Filter

Throttle Control Lever

Oil Fill/Dipstick

Air Filter

High Pressure Outlet

Pump equipped with

Automatic Cool Down System

High Pressure Hose -- Connect one end to water pump and the other end to spray gun.

High Pressure Outlet --Connection for high pressure hose.

Oil Fill/Dipstick --Check and fill with oil here.

Pump -- Develops high pressure.

Recoil Starter -- Used for starting the engine manually.

Spray Gun -- Controls the application of water onto cleaningsurface with trigger device. Includes safety latch.

Throttle Control Lever -- Sets engine in starting mode for recoil starter and stops a running engine.

Water Inlet -- Connection for garden hose.

/

4