Generac Portable Products 2,400 PSIHigh PressureWasher
•Point the nozzle down towards a firm surface and press the trigger to test the pattern (Figure 17).
Applying Detergent with the Adjustable Nozzle
AWARNING! You must attach all hoses before you start the engine. Starting the engine without all the hoses connected and without the water turned
ON will damagethe pump.
IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage
the pump.
•Twisting the nozzle adjusts the spray pattern from a narrow pattern to a fan pattern (Figure 18).
| Twist nozzle clockwise |
counterclockwise for fan | for narrow spray |
•For most effective cleaning, keep the spray nozzle between 8 to 24 inches away from cleaning surface.
•If you get the spray nozzle too close, especially using high
pressure mode, you maydamage the surface being cleaned.
•Do Not get closer than 8 inches when cleaning tires.
To apply detergent, follow these steps:
•Review the use of adjustable nozzles.
•Prepare detergent solution as required by the manufacturer.
•Hang the detergent solution on the "J" hook attached to the accessory tray, as shown in Figure 19.
•Placethe small filter end of the detergent siphoning tube into the detergent container.
AAUTION! Keep the detergent siphoning tube from coming in contact with the hot muffler.
•Slide the adjustable nozzle forward to low pressure mode. Detergent cannot be applied with the nozzle in high pressure position.
•Make sure the garden hose is connected to the water inlet. Check that the high pressure hose is connected to the spray gun and the pump. Start the engine.
/
10