Generac 5500XL manual 120/240 Volt AC, 30 Amp Locking Receptacle, 120 Volt, 30 Amp Receptacle

Generac Portable Products 5500XL Extended Life Generator

120 Volt AC, 30 Amp Locking Receptacle

Use a NEMA L5–30 plug with this receptacle. Connect a 3–wire cord set rated for 125 Volts AC at 30 Amps to the plug (Figure 8).

Figure 8 —- 120 Volt, 30 Amp Receptacle

120/240 Volt AC, 30 Amp Locking Receptacle

Use a NEMA L14–30 plug with this receptacle. Connect a 4–wire cord set rated for 250 Volt AC loads at 30 Amps (or greater). You can use the same 4–wire cord if you plan to run a 120 Volt load (Figure 9).

Figure 9 — 120/240 Volt, 30 Amp Receptacle

Use this receptacle to operate 120 Volt AC, 60 Hz, single phase loads requiring up to 3,600 watts

(3.6 kW) of power at 30 Amps. The outlet is protected by a 30 Amp push–to–reset circuit breaker.

This receptacle powers 120/240 Volt AC, single phase, 60 Hz loads requiring up to 3,600 watts (3.6 kW) at

30 Amps for 120 Volts; 5,500 watts of power (5.5 kW) at 22.9 Amps for 240 Volts. This outlet is protected by 30 Amp push–to–reset circuit breakers.

9