General Information1.1 UNPACKING

•Remove all packaging material.

•Remove separate accessory box.

•Remove carton off the generator.

1.1.1 ACCESSORY BOX

Check all contents (Figure 1). If any parts are missing or damaged locate an authorized dealer at 1-888-775-6937.

Contents include:

•

2

– Axle Pins

•

Oil Filter

•

2

– Wheel Spacers

•

Air Filter

•

2

– Hair Pins

•

Spark Plug

• 2 – Wheels

•

Spark Plug Wrench

• 1 – Frame Foot

•

Shop Towel

• 2 – Frame Bolts

•

2 – Frame Washers

•

2

– Vibration Mounts

•

Oil Funnel

•

4

– Flange Nuts

12 Volt Adaptor Plug Charger

•

2

– 1 Quart SAE 30 Oil Bottles

 

Figure 1 – Accessory Boxes

•Refer to Figure 2 and install the wheel kit and frame foot as follows:

•Slide the Axle Pin through the Wheel, Wheel Spacer (Washer) and the Frame.

•Install the Hair Pin to the Axle Pin to secure the wheel. Repeat for the opposite side.

•Secure the Vibration Mounts to the Frame Foot with the included locking nuts.

•To install the Frame Foot, install the Frame Bolts though the Frame Washers, Frame and Frame foot. Secure with the locking nuts.

Figure 2 – Wheel and Foot Assembly

ASSEMBLE

FRAME

FOOT

SECURE WHEEL

AND AXLE WITH

HAIR PIN

1.2 ASSEMBLY

Read entire Owner's Manual before attempting to assemble or operate the generator. The generator requires some assembly prior to using it. If problems arise when assembling the generator, please call the Generator Helpline at 1-888-775-6937.

1.2.1 ASSEMBLING THE WHEEL KIT AND FRAME FOOT

The wheel kit is designed to greatly improve the portability of the generator. You will need the following tools to install the wheel kit: Pliers, 1/2" (13mm) wrench and a socket wrench with a 1/2" (13mm) socket.

NOTE:

The wheel kit is not intended for over-the-road use.

 

 

WHEEL SPACER

FRAME

FRAME

(WASHER)

WASHER

BOLT

 

SLIDE AXLE

THROUGH WHEEL

AND WHEEL

SPACER

FLANGE

NUT

4