English

(NOTE: To engage the hammering mechanism, apply and maintain pressure on the bit. When pressure on the bit is released, the hammering action will stop and the rotation will continue until the tool is switched off.)

When using the hammer drill mode for drilling into hard material like concrete, we recommend that you use carbide-tipped percussion drill bits.

caution:

Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

caution:

Always check the direction of rotation before operating the tool in the hammer drill mode. The tool must be set for forward or clockwise rotation only. Failure to obey this caution may cause property damage.

caution:

Do not change the operating mode until the tool has come to a complete stop. Moving the “mode selector” switch while the drill is operating can cause damage to the tool.

5 POSITION ROTATABLE HANDLE

Your Drill is equiped with a five position rotating handle for greater control and manoeuvrability in tight places.

To select a position, pull back on the Black realease button on the top, handle side of the drill.

INSTALLING BITS

Inspect the drill bit shank and the drill’s chuck jaws for dirt or foreign matter and clean if necessary. Dirt on the drill bit shank or on the chuck jaws can cause misalignment or bit slippage during use. Drill bits larger than the hammer drill’s maximum rated capacity may cause the motor to overload and/or gear damage.

To install a drill bit:

•Unplug the hammer drill.

warning:

Failure to unplug the tool could result in accidental starting causing possible serious injury.

•Open the chuck jaws so the opening is slightly wider than the drill bit being installed.

•Position the drill so the chuck is pointing upward then insert the drill bit, allowing the bit to rest on the bottom of the chuck. For small bits, insert the drill bit so that the bottoms of its flutes are even with the top of the chuck jaws.

•Center the bit in the jaws and hand tighten the jaws by rotating the chuck collar clockwise, being sure the bit is properly aligned in the chuck jaws.

•Insert the chuck key into one of three holes in the chuck, turning the chuck key clockwise to securely tighten the chuck. Do not use a wrench, pliers, or means other than the chuck key to tighten or loosen the chuck.

To remove the drill bit:

•Unplug the hammer drill.

warning:

Failure to unplug the tool could result in accidental starting causing possible serious injury.

•Loosen the chuck by inserting the chuck key into one of the three holes in the chuck and turn it counter-clockwise.

•Remove the drill bit from the chuck.

warning:

To prevent personal injury, always remove the chuck key from the chuck after each use.

SETTING THE DEPTH GAUGE

Mounted in your hammer drill auxiliary handle is a metal rod called the depth gauge. Setting the depth gauge gives you the ability to repeatedly drill holes to the same depth.

1⁄2” 6 Amp Dual Purpose Hammer Drill

Operator’s Manual

GHD1260

Page 7 Page 9
Page 8
Image 8
Genesis Advanced Technologies GHD1260 Position Rotatable Handle, Installing Bits, To install a drill bit
Page 7 Page 9

GHD1260 specifications

Genesis Advanced Technologies has made a significant mark in the world of high-quality audio equipment, and the GHD1260 headphones stand as a testament to their commitment to excellence. Designed for both audiophiles and casual listeners alike, these headphones boast an array of features and technologies that elevate the listening experience to new heights.

One of the standout characteristics of the GHD1260 is its exceptional sound quality. The headphones employ advanced driver technology, allowing for an expansive soundstage and precise audio reproduction across the frequency spectrum. The 60mm dynamic drivers deliver powerful bass response while maintaining clarity in mids and highs. This balanced sound signature makes the GHD1260 versatile enough for various music genres, from classical to electronic.

Comfort is another key aspect of the GHD1260. The headphones are designed with ergonomics in mind, featuring plush ear cushions and an adjustable headband that ensures a secure yet comfortable fit. Whether you’re enjoying a long listening session at home or on the go, the lightweight design minimizes fatigue, enabling extended use without discomfort.

In terms of build quality, the GHD1260 is crafted using premium materials. The sturdy construction not only adds durability but also contributes to the acoustic performance, reducing unwanted resonance. The sleek finish and modern aesthetic make these headphones an attractive accessory for any music lover.

Connectivity options further enhance the usability of the GHD1260. The headphones include both wired and wireless capabilities, with Bluetooth support for hassle-free listening without the constraints of cables. The battery life is impressive, offering multiple hours of playtime on a single charge, perfect for those who are constantly on the move.

Furthermore, the GHD1260 features intuitive controls, allowing users to manage playback and take calls seamlessly. The integration of a built-in microphone adds functionality, making these headphones suitable for hands-free communication.

In summary, Genesis Advanced Technologies GHD1260 headphones combine superior sound quality, comfort, and robust build materials with advanced connectivity options and user-friendly features. They cater to the needs of any audio enthusiast, ensuring an immersive and enjoyable listening experience that stands out in today's competitive audio market.
Top Page Image Contents