7
2.Hook the tab hole over the tab on the ceiling plate as shown in Figure 17.
3.Raise the canopy, be sure the holes in the canopy and the ceil- ing plate are aligned, and loosely assemble the canopy screws one at a time. When all three screws are assembled, securely tighten all three canopy screws. Refer to Figure 17.
Tab Hole 
and Tab
Canopy
Screw
Figure 17 - Installing the canopy
installing the canopy trim ring
1.To easily install the canopy trim ring, locate the two tabs on the canopy trim ring. See Figure 18.
| Canopy |
Press Here when | Press Here when |
Removing | Removing |
Canopy |
|
Trim Ring | Tab |
Figure 18 - Canopy trim ring
2.Take both hands and push the canopy trim ring up to the top of the canopy. See Figure 18.
3.The canopy trim ring will snap and lock into place on the canopy.
removing the canopy trim ring
1.Locate the tab indicators, small bumps on top of tabs. Refer to Figure 19.
2.To remove the canopy trim ring, press firmly on opposite sides of the ring towards the canopy as shown in Figure 19. The tabs will flex out releasing the trim ring from the canopy.
Tab Indicator Canopy Trim Ring
Canopy
Figure 19 - Removing the canopy trim ring
© 2005 Hunter Fan Company
assembling the blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).
1.Your fan may include blade grommets. If your fan has grom- mets, insert them by hand into the holes on the blades as shown in Figure 20.
Grommet
Fan Blade
Figure 20 - Inserting the grommets into the fan blades
2.Attach each blade to blade iron using three blade assembly screws as shown in Figure 21.
Figure 21 - Attaching the blade to the blade iron
7 | 3/18/05, 8:44 PM |
