CHANGE LIGHT BULBS

WARNING

•Observe all safety warning and precautions! Improper light bulb removal or replacement could result in Death or Serious Injury.

•Disconnect power from opener before beginning this task.

•When replacing light cover, make sure wires are not pinched or near moving parts.

1.Disconnect power to door opener.

•Open powerhead light cover.

•Remove light bulb(s).

•Replace with maximum 100 Watt light bulb(s).

–Do NOT use light bulbs with greater than 100 Watt rating.

•Close powerhead light cover.

2.Reconnect power to door opener.

•Test light operation.

MOTION DETECTOR* - OVERVIEW

(Not available on all models)

Powerheads equipped with a motion detector sensor provide additional security when

exiting or entering the garage area.

*This sensor works by detecting body heat. Range of detection may be reduced when the temperature in the garage is close to body temperature.

NOTE: Detector positioning on the powerhead provides for monitoring below the powerhead.

OPERATION

•Detector sensor is always ON. There are NO user controls or adjustments.

•Lights automatically turn ON when a change is detected and will turn OFF after 4 minutes of no change.

•Motion detector sensor will not turn OFF lighting turned ON at the wall console.

•Lighting turned ON at the wall console will remain

ON until wall console turns lighting OFF or opener is used.

Motion Detector

RESET - OPEN/CLOSE TRAVEL LIMIT

Performing all ten (10) Limits/Force setting steps (pages 6-7) erases previous Limits/Force settings.

NOTE: The opener will not close the door automatically unless the Safe-T-Beam® System is installed and Limits are programmed.

©2011 The Genie Company

CARRIAGE ENGAGE/DISENGAGE

Use Release Handle to manually connect or release belt bullet to Carriage.

TO RELEASE CARRIAGE:

1. Pull handle DOWN then let go.

2. Manually move door until carriage releases from bullet.

3. Raise or lower door manually.

 

FDOO

NOT

CE

 

 

RBECOMESOBSTRUC ED

 

Release

PULLDOWNONHANDE

DOOR

 

 

PULL

 

Handle

 

 

 

TO RECONNECT CARRIAGE:

1.Verify RED block is in the UP position.

2.Manually move door until carriage engages bullet.

3.Raise or lower door using remote or wall console.

FIG. 6-3 Carriage Release

DOOR

DOOR

ENGAGE

DISENGAGE

(for installation)

(for installation)

TO REENGAGE PULL

TO DISENGAGE

DOWN AND TOWARD

PULL DOWN AND

POWERHEAD THEN

TOWARDS DOOR

LET GO

THEN LET GO

TO RELEASE or RECONNECT CARRIAGE,

 

PULL DOWN AND LET GO

 

FIG. 6-4 Carriage Release (cut away view)

 

3/2011

19

Page 18 Page 20
Page 19
Image 19
Genie 3042 Door, Change Light Bulbs, Motion DETECTOR* Overview, Reset OPEN/CLOSE Travel Limit, Carriage ENGAGE/DISENGAGE
Page 18 Page 20

3042 specifications

The Genie 3042 is a compact yet powerful telescopic boom lift designed to provide safe and efficient lifting solutions in a variety of applications. This versatile piece of equipment is particularly favored for use in construction, maintenance, and industrial projects where accessibility to heights is essential.

One of the standout features of the Genie 3042 is its impressive working height, reaching up to 12.2 meters (40 feet) and an outreach of up to 6.4 meters (21 feet). This makes it an ideal choice for tasks that require access to elevated work areas, while its narrow frame allows it to navigate through tight spaces with ease.

The machine is equipped with a sturdy platform that can accommodate up to two operators, along with their tools and materials, ensuring efficiency in tasks that require multiple personnel. Safety is a top priority, and the Genie 3042 comes with features such as an automatic level sensor and a load sensing system that ensures the lift operates safely within its intended capacity.

Technologically, the Genie 3042 is built with advanced hydraulic systems that provide smooth and precise boom movements. The lift is powered by a robust engine, which can be electric or bi-energy (dual fuel), offering flexibility depending on the work environment. The electric option is particularly suited for indoor tasks, as it produces zero emissions, while the bi-energy option allows for extended use in outdoor conditions.

Another key characteristic of the Genie 3042 is its ease of transportation. The lift’s compact design and lightweight construction mean that it can be easily towed to various job sites without the need for special permits. Additionally, the non-marking tires protect floors in sensitive environments, making it an excellent choice for indoor applications.

Maintenance is simplified due to the Genie 3042's design, which allows for easy access to key components. This ensures that downtime is minimized, contributing to operational efficiency.

In conclusion, the Genie 3042 is a versatile and feature-rich boom lift that combines height accessibility with safety and ease of use. Its advanced technology, compact design, and various power options make it a reliable choice for various lifting applications in challenging environments.
Top Page Image Contents