10

OPTIONAL PROGRAMMING POWERHEAD TO

Homelink®, Car2U®, or IntelliCode® 1 REMOTES and IntelliCode® 1 WIRELESS KEYPADS

Homelink® programming

If your Homelink® has been previously programmed to an Genie® opener begin with Step 1 and continue through Step

To complete any of these tasks you MUST have at least one Genie® IntelliCode® 2 remote button already programmed to the powerhead present.

For Homelink® or Car2U®: You must also have your Homelink® or Car2U® enabled vehicle present and their programming instructions to perform these programming steps.

For Genie® IntelliCode® 1 remote: You must also have your Genie® IntelliCode® 1 remote present.

For Genie® IntelliCode® 1 wireless keypad: You must also have your Genie® wireless keypad installed and a PIN already programmed into the keypad. Programming instructions for Genie® IntelliCode® 2 wireless keypad will come with the wireless keypad.

5 and 6 of the Homelink® section below.

If your Homelink® has not yet been linked to a Genie® opener then go to page 16 and change one remote button from IntelliCode® 2 to IntelliCode® 1, then program that button with the car Homelink® using Homelink® instructions and repeat steps 1-4 then continue with Homelink® steps 5-6.

©2011 The Genie Company

1PRESS and HOLD

PROGRAM

SET

—

+

 

 

 

 

 

 

SEE BOTH Blue LEDs come ON

2

RELEASE

SEE one

Blue LED come ON

3PRESS and

RELEASE

PROGRAM

SET

—

 

 

 

SEE long Purple

LED flashing

4

+

SEE both LEDs

 

 

flash Purple

PRESS and release a previously programmed Genie® IntelliCode® 2 remote button on remote. If you are unsure which remote you have see page 16. Remote must be IntelliCode®

2enabled.

Homelink® or Car2U® programming

IntelliCode® 1 remote or wireless keypad programming

5PRESS the Homelink® button twice.

6Test. Repeat as necessary for any other pre- programmed Homelink® enabled vehicle.

 

5

For Car2U® enabled vehicles follow the Car2U®

3/2011

 

instructions.

6

Test. Repeat as necessary for any other Car2U®

 

enabled vehicle.

Genie® IntelliCode® 1 remote

5On the IntelliCode® 1 remote PRESS a button and RELEASE. SEE long LED come ON Purple.

6On the IntelliCode® 1 remote PRESS the same button and

RELEASE.

SEE both LEDs on the powerhead come ON Blue. The next press of the remote will operate door.

7Test. Repeat as necessary for any other IntelliCode® 1 remotes.

Genie® IntelliCode® 1 wireless keypad

5Enter your wireless keypad PIN.

6Press and hold button 1 second then release and see on powerhead long LED come ON Purple.

7Press and hold button 1 second again then release and see on powerhead both LEDs flash Blue.

8Press and hold button again and opener will activate

9Wait 30 seconds, enter pin and press

button to verify operation.

All optional programming is complete. Your garage door opener is ready to use.

Page 9 Page 11
Page 10
Image 10
Genie 3042 manual Genie IntelliCode 1 remote, Genie IntelliCode 1 wireless keypad, See one, See long Purple LED flashing
Page 9 Page 11

3042 specifications

The Genie 3042 is a compact yet powerful telescopic boom lift designed to provide safe and efficient lifting solutions in a variety of applications. This versatile piece of equipment is particularly favored for use in construction, maintenance, and industrial projects where accessibility to heights is essential.

One of the standout features of the Genie 3042 is its impressive working height, reaching up to 12.2 meters (40 feet) and an outreach of up to 6.4 meters (21 feet). This makes it an ideal choice for tasks that require access to elevated work areas, while its narrow frame allows it to navigate through tight spaces with ease.

The machine is equipped with a sturdy platform that can accommodate up to two operators, along with their tools and materials, ensuring efficiency in tasks that require multiple personnel. Safety is a top priority, and the Genie 3042 comes with features such as an automatic level sensor and a load sensing system that ensures the lift operates safely within its intended capacity.

Technologically, the Genie 3042 is built with advanced hydraulic systems that provide smooth and precise boom movements. The lift is powered by a robust engine, which can be electric or bi-energy (dual fuel), offering flexibility depending on the work environment. The electric option is particularly suited for indoor tasks, as it produces zero emissions, while the bi-energy option allows for extended use in outdoor conditions.

Another key characteristic of the Genie 3042 is its ease of transportation. The lift’s compact design and lightweight construction mean that it can be easily towed to various job sites without the need for special permits. Additionally, the non-marking tires protect floors in sensitive environments, making it an excellent choice for indoor applications.

Maintenance is simplified due to the Genie 3042's design, which allows for easy access to key components. This ensures that downtime is minimized, contributing to operational efficiency.

In conclusion, the Genie 3042 is a versatile and feature-rich boom lift that combines height accessibility with safety and ease of use. Its advanced technology, compact design, and various power options make it a reliable choice for various lifting applications in challenging environments.
Top Page Image Contents