Begin here after the opener's physical assembly

and installation has been completed.

There are no assembly or installation steps included in this manual. Contact your Genie® Professional Dealer for an installation poster, if required, or visit www.geniecompany.com to download a PDF file.

The following mechanical assembly tasks must be completed before continuing.

†Powerhead and rail are bolted to each other (An illustration is shown on page 11) Example illustrations of the following items are shown on pages 12 and 13

†Rail end is attached to a header bracket which is attached to the garage door header

†Powerhead is attached to a support frame suspended from the ceiling or ceiling joists

†Both pieces of door arms are assembled and are attached to the garage door

†Safe-T-Beam® sensors installed and wired

†Wall console installed and wired (Shown on page 20)

†Carriage is engaged to the chain drive (An illustration is shown on page 11)

†Powerhead is plugged into an approved power outlet

Begin programming by setting Limits (see next page.)

A PDF VERSION INSTALLATION POSTER IS AVAILABLE AT WWW.GENIECOMPANY.COM

OR CALL 1-800-35-GENIE TO OBTAIN AN EMAIL PDF FILE

IMPORTANT INSTALLATION INSTRUCTIONS

WARNING:Toreducetheriskofsevereinjuryordeath:

1.READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS. (If you have questions or do not understand an instruction, call The Genie Company.)

2.Install only on a properly balanced sectional or one piece garage door. An improperly balanced door could cause severe injury. Have a trained door system technician make repairs or adjustments to cables, spring assemblies, and other hardware before installing the opener.

3.Remove all ropes and remove or make inoperative all locks connected to the garage door before installing opener.

4.Where possible, install the door opener 7 feet or more above the floor. For products having an emergency release, mount the emergency release within reach but, at least 6 feet above the floor to avoid contact with vehicles to prevent accidental release.

5.Do NOT connect the opener to source of power until instructed to do so.

6.Locate the wall console:

sWithin sight of the garage door,

sAt minimum height of 5 feet so small children are not able to reach it, and

sAway from all moving parts of the door.

7.Install the Entrapment WARNING Label next to the wall console in a prominent location.

8.After installing the opener, the door must reverse within 2 seconds when it contacts a 1-1/2 inch high object (or a 2 x 4 board laid flat) on the floor.

INFRARED PROTECTION FUNCTION

1.When garage door is opening, its movement will not be influenced if the Safe-T-Beam® is obstructed.

2.If the Safe-T-Beam® is obstructed before the garage door fully closes, the door will not close.

3.When the garage door is closing, if Safe-T-Beam® is interrupted by person or obstacle, the garage door will stop its downward travel and reverse automatically to its fully opened position.

4.Remove Safe-T-Beam® obstruction.

5.If the Safe-T-Beam® System fails, loses power, or is installed improperly, press and hold the wall console "open/close" button until the door reaches its fully closed position. If you release the "open/close" button on the wall console during the closing movement the door will reverse automatically to its fully opened position.

©2011 The Genie Company

3/2011

5

Page 5
Image 5
Genie chainmax 1200 garage door opener manual Important Installation Instructions, Infrared Protection Function

chainmax 1200 garage door opener specifications

The Genie ChainMax 1200 Garage Door Opener is a powerful and reliable solution for homeowners seeking to enhance the convenience and security of their garage space. This robust opener stands out in the market with its advanced features, impressive performance, and innovative technologies designed for ease of use.

At the heart of the Genie ChainMax 1200 is its 120-volt DC motor, which provides a strong lifting force, capable of handling garage doors up to 7 feet in height. For doors taller than 7 feet, extensions are available, ensuring versatility for various garage sizes. The opener operates quietly and efficiently, minimizing noise while maximizing performance—a crucial feature for homes with living spaces adjacent to the garage.

One of the key highlights of the ChainMax 1200 is its sturdy chain drive system, which is designed for durability and longevity. This system offers a reliable means of lifting and lowering the garage door, making it suitable for daily use without compromising on performance. The chain drive is especially effective for heavier wooden or insulated doors, ensuring safe and efficient operation.

Safety is a top priority for Genie, and the ChainMax 1200 incorporates advanced safety features, including an automatic reverse mechanism. This feature ensures that if an object is detected while the door is closing, it will reverse direction immediately, preventing accidents and protecting both people and pets. Additionally, the opener includes a security code technology that changes the access code each time the remote is used, significantly enhancing security against unauthorized access.

The Genie ChainMax 1200 also comes with convenient accessories such as a wireless keypad for secure entry, allowing users to open and close the garage door without needing a physical remote. The included two-button remote is user-friendly and designed to fit comfortably in your hand.

Installation of the ChainMax 1200 is straightforward, with a comprehensive manual and all necessary hardware included. For those keen on smart technology, optional upgrades allow for Wi-Fi connectivity, enabling users to operate their garage door through a smartphone app, enhancing remote access and control.

In summary, the Genie ChainMax 1200 Garage Door Opener combines power, safety, and convenience in one comprehensive package. With its durable construction, advanced technology, and user-friendly features, it is an excellent choice for anyone looking to improve their garage door system.