Genie LM-6, LM-9, LM-12 manual pxcq, EVE l E i~ 16 0, page

Master Valve

A master valve or pump start is sometimes used in systems. When selected ON the controller provides constant output to that terminal when valves are on. See MASTER VALVE HOOK-UP. (page 6) The LAWN MASTER allows you to select this option on each program. The default is OFF for all programs.

•To select your master valve ON:

Press NEXT until MASTER is displayed (after last valve)

•Push ON to activate, push OFF to turn OFF.

O n N e x t O f f

QQ@

b

SKIP-You may select an interval from I- 30 days to water. For example, to water once every 10 days push the + button until display shows 10. (This option does not relate to the days of the month or week)

	O n N e x t 0“
DAYS OF THE WEEK-Push ON to activate “DAYS”,push	8	@
NEXT to sequence through the individual days. Use the
		$
+ button to select the day. Use the - button to eliminate

that day.

-1

AUTO START TIME

This sets the TIME OF DAY you wish to water. Each start time will start a cycle running each valve, one at a time, for their programmed watering duration, starting with the first valve and continuing until the last valve has completed its watering.

To set

•Turn the dial to “AUTO START TIMES”. The display will show “START1”A

•To set the desired time push + button until desired time is displayed. Pushing the

-button will CANCEL that start time.

OTHER START TIMES

To water more than once a day: O n N e x t O f f

•Press NEXT to set a second or third START TIME.

•Repeat the above steps for each START TIME.

)m

DAYS TO WATERrplnon 0 This sets the DAYS of the week you wish to water.

There are 4 options you may use for convenience. Push

NEXT repeatedly to display options; press NEXT to select *~-ti=* the one that you prefer.

rw.l*u,-n

1.ODD-This option will water only ODD days

of the month. Automatically skips the 31st	pxcq
day of the month. Push ON to select

2. EVEN-This option will water only EVEN days of the

month.JULY Push ON to select.

)EVE::l ;;E;;i~

16 0 18 8 20 8 22

$$@26028@

page 6

Your programming is now completed for PROGRAM A. If you wish to use your other programs move PROGRAM

switch to position B or C and repeat the programming steps starting on page 8. Now return to the Auto Position. During operation B, all running valves will scroll on the display.

REVIEW	A B C
	(TIs>
To REVIEW your entire program:

•Set dial to “SPECIAL FEATURES”, select “PROGRAM”, Program display will show “Review”.

•Push the + button, display will scroll all programmed information.

OTHER DIAL FUNCTIONS

SYSTEM % ADJUSTMENT: Dial in this position for simple seasonal adjustment of all your valve’s watering duration, When weather conditions return to normal this adjustment can be returned to normal (100%). This change will not permanently change your original programs.

To use

•Select the PROGRAM you wish to adjust.

•Set the dial to “SYSTEM % ADJUSTMENT’. This indicates all valves will water at 100% of their watering duration.

•Use the + or - button to adjust, the display

will show selected change. IptnX*l,-**

•After adjusting return the dial to “AUTO”.

Note: Below 100% for less watering. Above 100% for more watering. 00% is off.

SPECIAL FEATURES

This position has three functions. In this position you may erase all programmed information (page programmed information (page , or set

8).

page 7