INSTALLATION INSTRUCTIONS

Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installa- tion. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance.

1.The pump should be installed flat on a base to a maximum of a 15 degree angle of inclination to ensure optimum lubrication.

2.The inlet to the pump should be sized for the flow rate of the pump with no unnecessary restrictions that can cause cavitation. Teflon tape should be used to seal all joints. If pumps are to be operated at temperatures in excess of

1600 F, it is important to insure a positive head to the pump to prevent cavitation.

3.The discharge plumbing from the pump should be properly sized to the flow rate to prevent line pressure loss to the work area. It is essential to provide a safety bypass valve between the pump and the work area to protect the pump from pressure spikes in the event of a blockage or the use of a shut-off gun.

4.Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of pressure spikes that occur in systems using a shut-off gun. A dampener must be positioned downstream from the unloader.

5.Crankshaft rotation on Giant Industries, Inc. pumps should be made in the direction desig- nated by the arrows on the pump crankcase. Reverse rotation may be safely achieved by following a few guidelines available upon request from Giant Industries, Inc. Required horsepower for system operation can be ob- tained from the charts on pages 3-9.

6.Before beginning operation of your pumping system, remember: Check that the crankcase and seal areas have been properly lubricated per recommended schedules. Do not run the pump dry for extended periods of time. Cavitation will result in severe damage. Always remember to check that all plumbing valves are open and that pumped media can flow freely to the inlet of the pump.

Finally, remember that high pressure operation in a pump system has many advantages. But, if it is used carelessly and without regard to its potential hazard, it can cause serious injury.

IMPORTANT OPERATING CONDITIONS

Failure to comply with any of these conditions invalidates the warranty.

1.Prior to initial operation, add oil to the crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL.

Use Giant recommened Oil

Crankcase oil should be changed after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.

2.Pump operation must not exceed rated

pressure, volume, or RPM. A pressure relief device must be installed in the discharge of the system.

3.Acids, alkalines, or abrasive fluids cannot be pumped unless approval in writing is obtained before operation from Giant Industries, Inc.

4.Run the pump dry approximately 10 seconds to drain the water before exposure to freezing temperatures.

2

Page 1 Page 3
Page 2
Image 2
Giant P217-3100, P219-3100, P218-5100, P217-5100, P218-3100 Important Operating Conditions, Use Giant recommened Oil
Page 1 Page 3

P220-3100, P227-5100, P218-3100, P227-3100, P220-5100 specifications

Giant has established itself as a leader in the cycling industry, known for its innovative designs and advanced technologies. Among its impressive lineup of bicycles, the P221-3100, P217-3100, P230-5100, P219-3100, and P230-3100 models stand out for their unique features and performance capabilities.

The Giant P221-3100 is renowned for its lightweight aluminum frame, which strikes a perfect balance between strength and agility. The bike features a Shimano drivetrain that ensures smooth and reliable shifting under various conditions. Its geometry is designed for enhanced stability, making it an ideal choice for both casual riders and competitive cyclists. The inclusion of hydraulic disc brakes provides superior stopping power, especially in wet or downhill conditions.

Similarly, the P217-3100 showcases a blend of comfort and performance. It is equipped with a plush saddle and ergonomic handlebars that promote a more relaxed riding posture. The bike's 27.5-inch wheels offer a perfect compromise between speed and control, making it versatile enough for urban commuting and off-road exploration. The P217-3100 also integrates Giant’s proprietary technology, which enhances energy efficiency to give riders a significant boost during climbs.

The P230-5100 takes performance to a higher level with its advanced suspension system. This model features a full-suspension design that absorbs shocks effectively, ensuring a smooth ride on rugged terrains. With a robust frame and components designed for durability, the P230-5100 is perfect for aggressive trail riding. Additionally, its tubeless-ready tires provide excellent traction and reduce the risk of flats, giving riders peace of mind on longer rides.

The P219-3100, on the other hand, is designed for speed enthusiasts. This road bike is characterized by its aerodynamic frame and lightweight construction, allowing riders to achieve impressive speeds on flat surfaces. The bike's cutting-edge gearing system ensures optimal power transfer, making it a favorite among competitive cyclists. Integrated LED lights also enhance safety during nighttime rides.

Lastly, the P230-3100 combines the best of both worlds—speed and versatility. With a minimalist design and a strong emphasis on aerodynamics, this bike is perfect for both racing and recreational riding. Its advanced braking technology enhances control, while the strategically designed frame geometry caters to various riding styles.

In conclusion, the Giant P221-3100, P217-3100, P230-5100, P219-3100, and P230-3100 models encapsulate Giant's commitment to quality and performance. Each bike caters to different riding preferences while maintaining the brand's hallmark features of durability, comfort, and innovation. Whether for thrill-seeking on rugged trails or smooth rides on city streets, these bicycles are sure to impress riders of all levels.
Top Page Image Contents