Host/DRAM Clock ratio
For FSB (Front Side Bus) frequency=533MHz,
2.0 | Memory Frequency = Host clock X 2.0. |
2.5 | Memory Frequency = Host clock X 2.5. |
Auto | Set Memory frequency by DRAM SPD data. (Default value) |
Memory Frequency (Mhz)
The values depend on CPU Host Frequency.
PCI/AGP Frequency (Mhz)
The values depend on Fixed PCI/AGP Frequency.
Top Performance |
|
| ||
|
| |||
| CMOS Setup | |||
` | Standard CMOS Features |
| Top Performance | |
` | Advanced BIOS FeaturesTop Performance |
| Load | |
` | Integrated Peripherals | Disabled.........................[] | Load Optimized Defaults | |
` |
| Set Supervisor Password | ||
Power Management Setup |
| |||
` | PnP/PCI Configurations | Enabled..........................[ ] | Set User Password | |
` | PC Health Status |
|
| Save & Exit Setup |
` | Frequency/Voltage Control |
| Exit Without Saving | |
Esc: Quit | KL: Move | ENTER: Accept | ||
ESC: Abort |
| KLJI: Select Item | ||
F8: |
| F10: Save & Exit Setup | ||
|
| |||
| System will be set in best performance configuration.. | |||
|
|
|
|
|
If you wish to maximize the performance of your system, enable "Top Performance."
Disabled | Disable this function. (Default Value) |
Enabled | Enable Top Performance function. |
"Top Performance" will increase H/W working speed. Different system configuration (both H/W component and OS) will effect the result. For example, the same H/W configuration might not run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not perform enough, the reliability or stability problem will appear sometimes, and we will recommend you disabling the option to avoid the problem as mentioned above.
English
- 41 - | BIOS Setup |
