Password Check, CPU Hyper-Threading, English

Password Check

Setup	The system will boot but will not access to Setup page if the correct
	password is not entered at the prompt. (Default value)
System	The system will not boot and will not access to Setup page if the correct
	password is not entered at the prompt.

If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.

This option appears only when the processor you install supports Intel® Hyper-Threading Technology.

Enabled	Enable CPU Hyper-Threading feature. Please note that this feature is only
	working for operating system with multiprocessors mode supported. (Default
	value)
Disabled	Disable CPU Hyper-Threading.

This option is available only when you install an Intel® Prescott processor (with 533MHz FSB).

Enabled	Limit CPUID Maximum value to 3 when using older OS like NT4.
Disabled	Disable CPUID Limit for Windows XP.(Default value)

Enabled	Enable No-Execute Memory Protect function.(Default value)
Disabled	Disable No-Execute Memory Protect function.

Enabled	Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled	Disable CPU Enhanced Halt (C1E) function.

Enabled	Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled	Disable CPU Thermal Monitor 2 (TM2) function.

Enabled	Enable CPU EIST function.(Default value)
Disabled	Disable CPU EIST function.

Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.

PCI	Set Init Display First to PCI VGA card.
Onboard/AGP	Set Init Display First to onboard/AGP VGA card.(Default value)

This option is available only when you use the onboard VGA function.

128MB	Set Graphics Aperture Size to 128MB. (Default value)
Disabled	Disable this function.

This option is available only when you use the onboard VGA function.
8MB	Set Graphics Share Memory to 8MB. (Default value)
1MB	Set Graphics Share Memory to 1MB.
(Note) This item will show up when you install a processor that supports this function.

	- 33 -	BIOS Setup

English