![](/images/new-backgrounds/1106756/10675659x1.webp)
English
Standard CMOS Features |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Fii, Dec 22 2006 | Item Help | |||
| Time (hh:mm:ss) | 22:31:24 |
| Menu Level` | ||
` IDE Channel 0 Master | [None] |
|
|
| ||
` IDE Channel 0 Slave | [None] |
|
|
| ||
` IDE Channel 1 Master | [None] |
|
|
| ||
` IDE Channel 1 Slave | [None] |
|
|
| ||
` IDE Channel 2 Master | [None] |
|
|
| ||
` IDE Channel 3 Master | [None] |
|
|
| ||
| Drive A |
| [1.44M, 3.5"] |
|
| |
| Floppy 3 Mode Support | [Disabled] |
|
|
| |
| Halt On |
| [All, But Keyboard] |
|
| |
| Base Memory |
| 640K |
|
|
|
| Extended Memory | 239M |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
| |||
| Week | The week, from Sun to Sat, determined by the BIOS and is | ||||
| Month | The month, Jan. Through Dec. |
|
|
| |
| Day | The day, from 1 to 31 (or the maximum allowed in the month) | ||||
| Year | The year, from 1999 through 2098 |
|
|
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave
IDE HDD
IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave IDE devices setup. You can use one of three methods:
• Auto | Allows BIOS to automatically detect IDE/SATA devices during POST(default) |
• None | Select this if no IDE/SATA devices are used and the system will skip the |
| automatic detection step and allow for faster system start up. |
• Manual | User can manually input the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
Capacity | Capacity of currectly installed hard drive. |
IDE Channel 2/3 Master
IDE HDD
Extended IDE Drive You can use one of the two methods:
• Auto | Allows BIOS to automatically detect IDE/SATA devices during POST(default) |
• None | Select this if no IDE/SATA devices are used and the system will skip the |
| automatic detection step and allow for faster system start up. |
- 30 - |