![](/images/new-backgrounds/1106756/10675673x1.webp)
Power Management Setup |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Power Management Setup |
|
| |
| ACPI Suspend Type | [S1(POS)] |
| Item Help | ||
| Power LED in S1 state | [Blinking] |
| Menu Level` | ||
| Off by Power button |
|
| |||
| PME Event Wake Up | [Enabled] |
|
|
| |
| ModemRingOn/WakeOnLan | [Enabled] |
|
|
| |
| Resume by Alarm | [Disabled] |
|
|
| |
x Date (of Month) Alarm | Everday |
|
|
| ||
x | Time (hh:mm:ss) Alarm | 0 : 0 : 0 |
|
|
| |
| Power On By Mouse | [Disabled] |
|
|
| |
| Power On By Keyboard | [Disabled] |
|
|
| |
x KB Power ON Password | Enter |
|
|
| ||
| AC BACK Function |
|
|
| ||
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
| |
| ACPI Suspend Type |
|
|
|
| |
| S1(POS) | Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) | ||||
| S3(STR) | Set ACPI suspend type to S3/STR(Suspend To RAM). |
| |||
| Power LED in S1 state |
|
|
|
| |
| Blinking | In standby mode(S1), poer LED will blink. (Default value) |
| |||
| Dual/OFF | In standby mode(S1): |
|
|
| |
|
| a. If use single color LED, power LED will turn off. |
| |||
|
| b. If use dual color LED, power LED will turn to another color. | ||||
| Off by Power button |
|
|
|
| |
| Press power button then Power off instantly. (Default value) |
| ||||
| Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed less | |||||
|
| than 4 seconds. |
|
|
| |
| PME Event Wake Up |
|
|
|
| |
| This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. | |||||
| Disabled | Disable this function. |
|
|
| |
| Enabled | Enable PME as wake up event. (Default value) |
| |||
| ModemRingOn/WakeOnLan |
|
|
|
| |
| An incoming call via modem can awake the system from any suspend state or an input signal | |||||
| comes from the other client server on the LAN can awake the system from any suspend state. | |||||
| Disabled | Disable Modem Ring On / Wake On LAN function. |
| |||
| Enabled | Enable Modem Ring On / Wake On LAN function. (Default value) |
English
- 37 - | BIOS Setup |