English
3.Press Y button on your keyboard after you are sure to update BIOS.
Then it will begin to update BIOS. The progress of updating BIOS will be displayed.
Please do not take out the floppy disk when it begins flashing BIOS.
4. Press any keys to return to the
Dual BIOS Utility
Boot From | Main Bios |
|
|
| |
Main ROM Type/Size | SST 49LF004A | 512K | |||
Backup ROM Type/Size | SST 49LF004A | 512K | |||
| Wide Range Protection | Disable |
|
|
|
| Boot From | Main Bios |
|
|
|
|
|
|
!! Copy BIOS completed - Pass !!
Please press any key to continue
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
Enter : Run | :Move | ESC:Reset | F10:Power Off |
You can repeat Step 1 to 4 to flash the backup BIOS, too.
5. Press Esc and then Y button to exit the
Dual BIOS Utility
Boot From | Main Bios |
|
|
| |
Main ROM Type/Size | SST 49LF004A | 512K | |||
Backup ROM Type/Size | SST 49LF004A | 512K | |||
| Wide Range Protection | Disable |
|
|
|
| Boot From | Main Bios |
|
|
|
|
|
|
Are you sure to RESET ?
[Enter] to continure or [Esc] to abort...
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
Enter : Run | :Move | ESC:Reset | F10:Power Off |
After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.
The BIOS file becomes Fab after updating.
Award Modular BIOS v6.00PG, An Energy Star
Ally
Copyright (C)
Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)
<CPUID : 0F27 Patch ID : 0027>
Memory Testing : 131072K OK
Memory Frequency 266 MHz in Single Channel
Primary Master : FUJITSU MPE3170AT
Primary Slave : None
Secondary Master :
Secondary Slave : None
Press DEL to enter SETUP / Dual BIOS /
- 54 - |