B.Delete a RAID array (Delete Array)¡G
To delete a RAID array, select Delete Array and press <Enter>. After confirming the RAID array to be deleted, press <Enter> and the The selected array will be destoried. Are you sure? Continue? Press Y/N message will appear. Press <Y> to confirm or <N> to cancel.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Create Array |
|
| Delete a RAID array contain |
| |||
Delete Array |
|
| the hard disks attached to |
| |||
Create/Delete Spare | VIA RAID controller |
|
| ||||
Select Boot Array |
| F1 | : | View Array/disk Status |
| ||
Serial Number View |
| ||||||
The selected array will be destoried. | , | : Move to next item |
| ||||
Enter | : | Confirm the selection |
| ||||
Are you sure? Continue? Press Y/N | ESC | : | Exit |
|
| ||
Channel | Drive Name | Array Name |
| Mode | Size(GB) | Status | |
[*]Serial_Ch0 Master | ST3120026AS | ARRAY 0 |
| SATA | 111.79 | Stripe0 | |
[*]Serial_Ch1 Master | ST3120026AS | ARRAY 0 |
| SATA | 111.79 | Stripe1 | |
Figure 7
Except for RAID 1 array, all the data on the disk array will be destroyed after a disk array is deleted. When RAID 1 array is deleted, the data on the two RAID disks will be reserved and the two hard disks will become normal disk drives.
English
- 67 - | Appendix |
