Gigabyte GA-K8VT800M user manual Floppy 3 Mode Support for J apan Area, Halt on, Base Memory

English

CFloppy 3 Mode Support (for J apan Area)

8Disabled	Normal Floppy Driv e. (Default v alue)
8Driv e A	Driv e A is 3 mode Floppy	Driv e.
8Driv e B	Driv e B is 3 mode Floppy	Driv e.
8Both	Driv e A & B are 3 mode Floppy Driv es.

CHalt on

The category determines whether the computer will stop if an error is detected during power up.

8NO Errors	The sy stem boot w ill not stop for any error that may be detected
	and y ou w ill be prompted.
8All Errors	Whenev er the BIOS detects a non-fatal error the sy stem w ill be stopped.
8All, But Key board	The sy stem boot w ill not stop for a key board error; it w ill stop for
	all other errors. (Default v alue)
8All, But Diskette	The sy stem boot w ill not stop for a disk error; it w ill stop for all
	other errors.
8All, But Disk/Key	The sy stem boot w ill not stop for a key board or disk error; it w ill
	stop for all other errors.

CMemory

The category is display -only which is determined by POST (PowerOn Self Test) ofthe BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.

The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map.

GA-K8VT800M Motherboard - 41 -

麎 鞢鏒 齇 蘼

蠖韙櫆曚誜陼 韖む