Gigabyte GA-M55S-S3 SATAII1 / 2 / 3 / 4 SATA 3Gb/s Connectors, Controlled by nForce, Battery

English

9)SATAII1 / 2 / 3 / 4 (SATA 3Gb/s Connectors, Controlled by nForce 550)

SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the SATA 3Gb/s and install the proper driver in order to work properly.

			Pin No.	Definition
SATAII4			1	GND
			2	TXP
			3	TXN
			4	GND
		1	5	RXN
			6	RXP
		7	7	GND
SATAII1	SATAII2	SATAII3

10) BATTERY

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

If you want to erase CMOS...

1. Turn off the computer and unplug the power cord.

2. Gently take out the battery and put it aside for about one minute. (Or you can use a metal object to connect the positive and negative pins in the battery holder to make them short for five seconds.)

3.Re-install the battery.

4.Plug the power cord in and turn on the computer.

GA-M55S-S3 (rev. 2.0) Motherboard - 22 -