Gigabyte GA-VM800PMC Init Display First, VGA Share Memory Size, Hard Disk Boot Priority

English

2-2	Advanced BIOS Features
		CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
			Advanced BIOS Features
	Init Display First		[PCI Slot]			Item Help
	VGA Share Memory Size		[64M]		Menu Level`
`	Hard Disk Boot Priority		[Press Enter]
	First Boot Device		[Floppy]
	Second Boot Device		[Hard Disk]
	Third Boot Device		[CDROM]
	Password Check		[Setup]
	CPU Hyper-Threading (Note)		[Enabled]
	Limit CPUID Max. to 3 (Note)		[Disabled]
	No-Execute Memory Protect (Note)		[Enabled]
	CPU Enhanced Halt (C1E) (Note)		[Enabled]
	CPU Thermal Monitor 2(TM2) (Note)		[Enabled]
	CPU EIST Function (Note)		[Enabled]
	Virtualization Technology (Note)		[Enabled]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults	F7: Optimized Defaults

Init Display First

This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.

PCI Slot Set Init display first to PCI Slot. (Default value) Onboard/AGP Set Init display first to Onboard/AGP.

VGA Share Memory Size

Disabled	Disable this function.
16M	Set VGA share memory size to 16 MB.
32M	Set VGA share memory size to 32 MB.
64M	Set VGA share memory size to 64 MB. (Default value)

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.

Use <> or <> to select a device, then press<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

(Note) This item will show up when you install a processor that supports this function.

GA-VM800PMC Motherboard - 32 -