Gigabyte GS-SR125EDL user manual PCI Expansion Card Installation

Hardw are Installation Process

Step 2-5: PCI Expansion Card Installation

PCI Slot 2 is not compliance with this model.

GS-SR125EDL provides expansion riser slots for two peripheral cards, 100/133MHz , one full-height/ one half-length. To install the peripheral, please go through the following steps.

Step 1 Remove the screws on the riser bracket. Step 2 Detach the riser bracket with both hands.

Step 3 Installing the PCI Riser card. To install the riser card, just simply push it into the module. Step 4 Secure the card with screws.

Repeat Step 3 & 4 to install the rest of add-on cards.

Step 5 Finally, align the stable racks to the system module (see the arrow direction mark 1), and push down vertically .

Step 6 Reverse Step 1 & 2 to secure the riser bracket firmly . Installation completed.

Step 1

Step 2

Step 3

Step 4

13