Gilson 1200MP manual TOW Pole Assembly, Saftey Chains

TOW POLE ASSEMBLY

The tow pole assembly is located on the front of the mixer and is used for transport only.

For transport, pull the tow pole assembly out, line up the hold and insert the L-shaped pin through holes.

When operating the mixer, pull the L-shaped pin out of the hole and push tow pole assembly all the way in. Line up the holes and insert the L-shaped pin through the holes.

SAFTEY CHAINS

1.Cross chains under the tow pole when connecting the safety hooks to the tow pole. SEE FIGURE 2

2.Allow enough slack to permit vehicle turning while keeping chains snug enough under tow pole to prevent pole from contacting the ground in case of disconnection or hitch failure.

3.Secure safety hooks to appropriate mounting area on tow vehicle.

NOTE: SAFETY CHAIN LENGTH MAY NEED TO BE ALTERED FOR PROPER CONNECTION TO TOW VEHICLE. REPOSITION HOOKS, DO NOT CUT CHAIN.

6